2019
-
05
-
25
click:
24
First, communication start and stop + communication given frequency case1. Connect the communication line and fault output signal line connected to the air compressor controller according to Figure 1-1.2. P0-17=1, restore the inverter parameters to factory settings.3. Set the following parameters and perform static self-learning of parameters.Function code setting functionF0.07150 maximum output frequency (set according to actual conditions)F0.08150 operating frequency upper limitF2.111 permanent magnet synchronous motorF2.0122 motor rated power (set according to motor nameplate)F2.02150 motor...